Product Reviews

Takagi T-KJr2-IN-NG

Moving from a hot shower into a chiller atmosphere leads to a quantum drop in body temperature leaving a peaceful state of mind. Fully-modulating tankless gas water heaters add a spin of luxury to residential applications. They can generate hot water to run two or more bathrooms.

Takagi T-KJr2-IN-NG Indoor Tankless Water Heater Review

Unlike mainstream tank-style water heaters, powerful tankless water heaters do not cut off hot water in the middle of your soothing bath. After combing through the market doggedly, we hit upon a world-class and renowned model presented by our Takagi T-KJr2-IN-NG Indoor Tankless Water Heater Review.

The T-KJr2 delivers hot water to residential hot water systems usable with residential high flow rates and radiant heating applications.

Takagi T-KJr2-IN-NG Indoor Tankless Water Heater Review | 5 Major Features

1. Fully Modulating & Durable Heat Exchanger

The Takagi T-KJr2 operates with a fully-modulating, computer-monitored burners and electronic ignition that only consumes the amount of gas according to your preferred temperature level. You can connect directly or indirectly, storage tanks, recirculation patchworks, radiant floor system, domestic and heating applications.

It significantly upgrades the unit’s efficiency while it cuts back your gas bill. Commercial-Grade copper heat exchanger guarantees corrosion-repellent properties.

Copper improves thermal conductivity by 25x times than stainless steel, thus, stabilizing outlet water temperature fast. The energy furnace’s design can sustain indoor applications with a super-hot copper heat exchanger that preheats water on demand. It checks in at an energy factor of 0.81-0.83.

2. Efficient Performance & Simple Use

Takagi T-KJr2-IN-NG Indoor Tankless Water Heater ReviewsTakagi T-KJr2 matches the performance of a 40-gallon tank-type standard unit. Despite having the smallest size in the all Takagi product line-up, it shines on the bleeding edge of technology and packs a punch to facilitate a regular flow of hot water for a household.

You can use its remote control to adjust adding more convenience. Gas-powered and vented to the outside, it has roughly 0.5 GPM activation rate. It works on an unobtrusive display that gives you quick access to modulate settings from 98-to140 degrees.

The unit guarantees constant water temperature with thermistors and boasts an air-fuel ratio (AFR) sensor that detects efficiency and thus diminishing toxic emissions.

3. Heat Output and Flow Rate

You can generate hot water to run up to two bathrooms in warm climates. The Takagi T-KJr2 does not guzzle electricity with the gas-fed operation. It renders input somewhere in the neighborhood of 19,500 to 140,000 BTU/hr. It has a flow rate of 6.6 gallons per minute (GPM) at 350 F while the heat output can climb to 70 F at 3.3 GPM.

The unit can support hydronic baseboard and radiant floor heating functions. You can go, Takagi, if you have a small or medium-size family with slightly low demand for hot water. Unlike traditional storage-style tanks that clog with deposits and corrosion or pilot light that fritters away gas, it ensures you never run out of hot water.

4. Temperature Remote Controller

Takagi T-KJr2-IN-NG Indoor Tankless Water HeaterThe Takagi T-KJr2 includes a remote control and power cable as standard accessories. The Temperature Remote Controller included (TM-RE02) lets you adjust readings beyond the factory settings and acts as a diagnostic instrument for error codes.

It shows a concise error code that pinpoints a problem with the system making it easier to troubleshoot. You can adjust incoming or outgoing water temperature within the range of 99°F to 167°F.

It makes it easy to reset the temperature level of the unit while you can install in a remote location several feet away. A manual Hi-Limit Switch, however, prevents water temperature from exceeding the safe limits.

5. Device-Defensive Technology

The Takagi T-KJr2 protective system shields against the internal freeze, overheating, and surge. The troubleshooting diagnostic error codes resolve mechanical failure quickly.

Built-in scale and leak detectors prolong unit’s lifespan and forestall water damage respectively. Takagi’s proprietary Air-Fuel Ratio (AFR) sensor regulates and maintains efficient combustion throughout, tweaks fan motor speed for proper air/fuel proportion, and diminish emissions and maximize performance.

The unit also comes with Exhaust and Water Temperature Safety Control for advanced protection. Its Overheat Cutoff Fuse inhibits breaches in the heat exchanger reservoir. Loads of safety packages will keep it functional for years.

Why should you use Takagi T-KJr2-IN-NG Indoor Tankless Water Heater?

Takagi T-KJr2-IN-NG Indoor Tankless Water Heaters reviews

1. Compact and Snugly-Installable

The Takagi T-KJr2 has compressed dimensions of merely 20.5″ x 13.8″ x 6.7″ allowing you to install the potent tankless electric water heater anywhere. The subtle shape allows indoor installation proximately than conventional tank-type heaters, which cuts back flow-time through ducts and dissipates less energy.

2. Flow Rate Proper for Residential Applications

The unit heats water flows at 6.6 gallons per minute (GPM) maximum. The flow rate renders ample thrust for light residential uses with one to two bathrooms in a small home, condo, cabin, or apartment.

3. Commercial-Grade Copper Heat Exchanger

Premium-quality copper alloy with superior heat-resistance, higher tensile strength and maintains hardiness and a fine grain at extreme temperatures. Commercial-grade copper alloy offers resistance to the damaging impacts of erosion that causes leakage in heat exchangers.

4. Endless Hot Water

Since it heats water as you use it, you will never fall short of hot water ever. It takes nanoseconds for the water to hit your preferred temperature. The Takagi T-KJr2 will continually drive a stable stream of warm water to meet the demands of your applications.

5. Energy-Efficiency & Plethora Savings

Unlike conventional tank-type water heater that warms up and holds a set volume of hot water, the unit only activates as you use h2O. It does not lose standby energy for more efficient heating and energy conservation.

PROS
  • Compact size and wall-mount design carves out extra storage space and allows flexibility in use
  • Packs loads of safety features, including-Air-Fuel Ratio (AFR) Sensor, internal freeze protection system, Hi-Limit switch, and Overheat Cutoff Fuse
  • Durable and superior performance heat exchanger made from commercial-grade copper
  • Flow rate of 6.6 GPM
  • More eco-friendly than midrange gas alternatives and low emissions
  • Fully-modulating, gas-powered and tank-less water heater
  • Easy installation by a technician will leave the unit to serve your family for years
  • Includes an intelligent digital display, power cord, and remote control
  • Troubleshooting diagnostic codes for fast resolution
CONS
  • Although it requires simple installation, you will have to engage a technician

FAQ – Frequently Asked Questions

  1. I live in the Commonwealth of Massachusetts; does it meet local installation codes?

Yes, it adheres to local installation codes across the US.

  1. Will this Takagi attune the way I use the shower?

For the most soothing shower soaking, turn the hot water faucet on full, allow heating and cooling.

  1. How long does the Takagi T-KJr2 take to heat up?

The unit will hit its peak temperature and start reheating the water in the New York minute after activating the tap.

  1. Does the model do the job in overly elevated attitudes?

It comes with DIP switches to tweak performance with attitude.

  1. How does it work with hard water?

For water hardness above 7, throw in a scale inhibitor to preserve the efficiency of the heat exchanger.

Final Verdict

Our Takagi T-KJr2-IN-NG Indoor Tankless Water Heater Review touts the model for unmatched quality, energy-efficiency, and durable construction. It comes in compact size and wall-mounted design to free up generous floor space while decreasing the flow-time for water through pipes for thermal efficiency.

You can install it in your condo, tiny house, apartment or cabin for whacking power bill savings with minimized energy consumption. It supplies endless hot water if sized appropriately for your household applications at 6.6 GPM.

No storage tank, unlike traditional models which clog with scales and rust. The Temperature Remote Controller allows you to increase or decrease output readings from 99°F to 167°F and also functions as a diagnostic tool that shows a specific error code whenever the unit encounters defects.

 

Share this Story

Related Posts